top of page
GET LEARNING!
TUTORIALS
Brainy-Bits
A Better Ultrasonic Sensor for the Arduino? JSN-SR04T
OVERVIEW If you have been experimenting with the Arduino platform, I’m sure you have at some point played around with the HC-SR04...
13,422 views
Brainy-Bits
Stepper Driver stops working?! What Happened and Why?!
OVERVIEW Over the years I’ve done many projects and tutorials using Stepper Motors and of course that includes Stepper Drivers. Stepper...
13,307 views
Brainy-Bits
Stepper Motor MicroStepping! What to keep in mind when doing it?
OVERVIEW In the last tutorial I’ve looked at an alternative to the EasyDriver… The L298N. Although the L298 works, it’s not the best...
20,964 views
Brainy-Bits
The Cheapest way to control a Stepper Motor with an Arduino. But is it any good?
OVERVIEW I’ve done quite a few tutorial about controlling stepper motors with an Arduino. And looking back, I used the EasyDriver motor...
12,781 views
Brainy-Bits
How to – Flip Book style Animation on a Nextion LCD
OVERVIEW After publishing my last tutorial on the YouTube Subscriber counter, I got a couple of questions on how I created those...
1,998 views
Brainy-Bits
My take on the ‘Obsolete’ YouTube Subscriber Counter!
OVERVIEW Tadahh!!! Well ok, it’s really nothing that special, but it’s my take on the YouTube subscribers counter! Since Google crippled...
1,406 views
Brainy-Bits
Making something that’s been done so many times before!
OVERVIEW Oh, the infamous YouTube Counter project! I know there’s a lot of them out there, but I always wanted to build one for myself....
1,335 views
Brainy-Bits
A Piece of Advice for any Arduino and Electronic Project!
OVERVIEW ince I’ve been doing Arduino tutorials and various electronic projects for a couple of years now, I’ve learned a thing or two...
2,329 views
Brainy-Bits
DIY Wall Mounted Workbench under 100$!
OVERVIEW I‘ve finally found the time to rearrange my workshop, so I went ahead and built a wall mounted workbench to make the most out of...
1,058 views
Brainy-Bits
CNC PCB Milling on the X-Carve... Yes it does work!
OVERVIEW A while back I aquired the Inventable X-Carve CNC machine with the goal of milling PCB at home for quick projects or prototypes....
2,692 views
bottom of page